Delta Model 32-350, Horizontal Boring Machine, 1 HP, 1 PH, 115/230 V

Features

• Adjustable hold-down clampand boring head are pneumatically controlled by a foot pedal to keep operator's hands free.
• See-thru guard protects from flying woodchips.
• Heavy cast-iron table features dovetailed miter gage slots for keeping miter gage secured when locked in place.
• Also with standard-equipped stock stop for operations that require repetitive drilling.
• Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth.
• Guide rails are concealed inside flexible rubber tubing for protection against dust and chips.
• Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.
• Aluminum Boring Head contains two adjustable spindles.
• Easy-to-read scales and reference lines for accurate setting.
• Convenient grease fitting accepts standard grease gun for lubricating boring head.
• Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.
• Fabricated steel cabinet has bolt-down feet for operating sability.

Specifications

• Motor: 1HP, 3450 rpm, 115/230V, 60 hz, 1 Phase
• Table Size: 15-3/4" x 9-7/8" (400 x 251 mm)
• Spindle: Accepts 7/16" - 14 RH TPI
• Max. Bit Diamter: 5/8"(15 mm)
• DRDrill Stroke: 3 7/8"(98 mm)
• Min./Max. Drill Centers: 3/4" to 3"(19 to 76 mm)
• Air Requirement: 90 PSI
• Table Travel To Center of Bit: 3 1/2"(89 mm)
• Max. Material Thickness: 8 1/2"(216 mm)
• Head Travel: 3 7/8"
• Height: 48" (1219 mm)
• Length: 37-1/2" (953 mm)
• Width: 15-3/4" (400 mm)
• Weight: 303 lbs (138 kg)