SuperMax 50" Drum Sander, Double-Drum, 1 PH (Stock # 750102)
(Shown with additional options)

PROSCALETM

• Displays how much material is being removed per pass
• Displays zero when the desired thickness is reached
• Displays the actual thickness of the stock as it exits the sander
• Standard on 220 volt series 50x2 drum sanders

Sand Smart Control

• Eliminates the guess-work of manually controlling the infinitely-variable feed speed
• Simplifies the sanding operation
• Provides a consistent finish even with varying grain pattern and density
• Greatly increases abrasive planing and dimensioning speed
• Maintains highest possible feed rate without overload
• Standard on all 220 Volt Series drum sander models

Features

• Continuous-duty 7.55HP motor, 208- 230 Volt power
• SandSmartÖ automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish
• Multiple grit sanding in single pass with double drum models
• Magnetic starter
• Precisely dimension stock within .010ö across width of sander
• 50ö wide sanding capacity
• Casters included (wheel and swivel lock)
• Height of the rear drum is independently adjustable in relationship to the front drum
• Electric height adjustment, high speed and adjustable speed
• Precision-flattened steel conveyor bed reinforced with four steel cross sections for no ôflexö
• Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abra- sives tight
• Cast stand, zinc-plated steel bed, centerless ground column tubes
• Dust Collection- mandatory for all models: 1800 CFM min.
• Shipped assembled, some minimal assembly required
• Drum ball bearings are sealed and permanently lubricated

Specifications

• Sanding Capacity
• Maximum Width (in): 50
• Minimum Length (in): 3-1/2
• Maximum Thickness (in): 12
• Minimum Thickness (in): 1/32
• Dimensions (HxWxD/in): 50x71x31
• Drum(s): Extruded Aluminum - 5" diameter
• Drum Speed: 1600 RPM
• Dust Hood: Model Hinged back steel with three 4" vacuum ports
• Height Adjustment: (in) 3/32 per turn, DepthGauge with locking stop
• Ball Bearings: 4
• Conveyor Motor SandSmartÖ controlled, 220 in-lb torque, direct drive D.C. motor, Infinitely variable 0-15 feet per minute
• Drive Motor (TEFC): 7.5 HP, 1ph, 1740 RPM 208-230V, 60HZ continuous duty
• Power Requirements: 50amp service
• Shipping Weight (lbs:) 820