Powermatic Model PM15, 15" PLaner/Molder (Stock # 1120003)

The PM15 Planer/Molder from POWERMATIC« is loaded with features that make it a standout. A large 5HP motor supports a 15" wide planing capacity and enough power to run double knife sets for molding. The stand is fully enclosed and equipped with integral casters for shop mobility. Two feed speeds, 10 and 20 FPM, allow you to operate quickly for maximum stock removal, or more slowly to yield a fine milled finish on decorative moldings. The hinged top has a 4" dust collection port, and opens to expose the cutterhead, allowing for fast and easy tooling changes. This machine will use either single molding knives or 3 knife sets.

Features

• 5HP motor powers through big jobs
• 15" planing capacity is wide enough to run double molding knife sets
• Easy-to-read depth of cut scale with large handwheel for quick set ups
• Two feed speeds provide maximum stock removal or a fine milled finish for decorative moldings
• Feed rollers and cutterhead supported by full cast iron head assembly
• Machine uses single or three piece molding knives, providing a wide selection of profiles
• Hinged top for fast, easy tooling changes
• Fully enclosed base cabinet with integral casters for complete mobility
• Cast iron table is supported by 4 lead screws and height is controlled by chain and sprocket for precise depth of cut

Standard Equipment

• Two-speed gearbox
• Tool kit
• Dust chute
• Integrated casters
• 3 High speed steel planer knives
• Knife setting gauge

Specifications

• Cuts Per Minute 13500 planing
• Cutterhead Diameter (in.) 2-7/8
• Cutterhead Speed (RPM) 4500
• Dust Collection Minimum CFM Required 900
• Dust Port Diameter (OD/in.) 4
• Feed Rate - Molding (FPM) 10 and 20
• Feed Rate - Planing (FPM) 10 and 20
• Infeed Roller Diameter (in) 1-1/2
• Maximum Depth of Cut - Molding (in.) 3/4
• Maximum Depth of Cut - Planing (in.) 1/8
• Maximum Planing Thickness (in.) 6-1/2
• Minimum Planing Length (in.) 8
• Motor HP 5HP
• Motor Phase 1Ph
• Motor Voltage 230V
• Net Weight 423 pound
• Number of Knives 3
• Outfeed Roller Diameter (in) 1-1/2
• Overall Dimensions 28 x 34 x 51
• Scale/Cursor inches & millimeters
• Table Height Adjustment (in.) 1 Turn = 1/16"
• Table Size (in.) 27-1/2 x 15-1/8
• Working Width (in.) 15