Product Description
Save time and speed up production in your glue-up and ripping operations.
The Cantek C12RSH Straight Line Ripsaw is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
Why Cantek C12RSH Straight Line Ripsaw?
- Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut.
- Maintenance-free chain track with the use of a reliable mechanical lubrication system.
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
Saw arbor diameter | 1″ |
Saw blade diameter | 10 – 12″ |
Saw arbor speed | 4500 rpm |
Feed Speeds – variable | 50 to 120 FPM |
Maximum workpiece thickness | 3.34″ (12″ blade) |
Minimum workpiece length | 8″ |
Glue line guarantee | 10’ (+/- 0.0098” or 0.25mm) |
Distance between saw and column | 18″ |
Arbor motor | 15 HP |
Feed motor | 1 HP |
Electrical | 46 amps (230V); 23 amps (460V) |
Table size | 39″ x 57″ |
Table height | 31-7/8″ |
Dust port size | 4″ |
Net weight | 2,090 lbs |
Machine dimensions | 68” x 46” x 62” |
Shipping weight | 2,530 Lbs |
Shipping dimensions | 65″ x 55″ x 60″ |
