Product Description
Precision glue joint ripsaw built for power and speed.
The Cantek SRS330 Straight Line Ripsaw is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.
Why Cantek SRS330 Straight Line Ripsaw?
- Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut
- Powerful 20HP saw motor for even the most demanding rip applications
- Maintenance-free chain track with the use of a reliable mechanical lubrication system
- Variable feed speed by frequency inverter for optimum cutting results
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Very rigid machine body with a welded steel frame
- Absolute straight line feeding with glue joint to 13 ft.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation chain oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers: 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
Max. workpiece thickness: 10″ blade | 2.36″ |
Max. workpiece thickness: 12″ blade | 3.35″ |
Max. workpiece thickness: 13″ blade | 3.94″ |
Max. workpiece thickness: 14″ blade | 4.33″ |
Minimum work piece length | 8″ |
Distance between saw and column | 18.1″ |
Saw arbor diameter | 1″ |
Saw blade diameter | 10″ – 14″ |
Saw arbor speed | 4300 RPM |
Useable chain length | 47″ |
Glue line guarantee | 13′ (+/- 0.0098″) |
Feed speeds variable | 33~130 FPM |
Arbor motor | 20 HP |
Feed motor | 2 HP |
Dust collection outlet | 4″ |
Table size | 36.6″ x 64.6″ |
Table height | 31-7/8″ |
Machine weight | 3190 lbs |
Machine dimensions | 78 ¾” x 44″ x 64″ |
Shipping weight | 3630 lbs |
Shipping dimensions | 76 ¾” x 53″ x 67 ¾” |
Electrical requirements | 230/3/60 = 60.8 Full Load Amps460/3/60 = 30.4 Full Load Amps |
