Product Description
The FD-PUP is a 350 CFM suitcase style Portable welding fume / soldering extractor. It is designed for soldering fume extraction or light use welding fume extraction.
NOTE: The FD-PUP is not designed for production welding. If you are doing production welding you need the Fume Dog Portable, you can find it here.
- Made in the USA
- Self supported arm so you don’t have a hose flopping all over the place
- Motor life of 100,000 hours on average, drastically outperforming brush motor configurations.
- Nice and quiet at 62 dB
- Casters allow for roll around portable configuration and handle allows for horizontal suitcase configuration.
- California Air Resources Board certified
Plain English Description:
- 350 CFM suitcase welding fume extractor.
- Designed for light use.
- Please don’t call and ask why your little suitcase extractor can’t handle 8 hours of flux-core welding a day. We have a Portable Welding Fume Extractor for that, you can find it here.
- Blower motor rated at 100,000 continuous duty hours.
- Most of the other extractors like this use what are called brush motors. They don’t last very long without having to replace the brushes, it is why they are cheap. If it was easy to change the brushes out, I’m sure you’d be reading about it on their product page instead of finding out about it for the first time here.
- Keeps you safe.
- Yes, breathing melted metal or plastic fumes is bad for you.
CFM: 350
Weight: 30 lbs.
Frame: 18-gauge steel, polyurethane powder coat finish
Dimensions: 12.5” W x 12.5” D x 19.5” H
Blower/Motor: 350W, 2.8 amps, 120/1/60, 2000 RPM
Typical Motor Life: 100,000 hours (depending on operating conditions)
Noise Level: 62 dB
