Product Description
JET’s 24” Planishing Hammer has a quick change set up on the upper dies and a deep throat that works to the middle of most panels. The head with 3-speed regulator is capable of 4,400 – 4,800 / 3,200 – 3,500 / 1,800 – 2,000 blows-per minute (BPM). Easy to-reach, adjustable flow control valve allows the user to deliver the proper BPM needed for any job. Operates on standard shop air.
- Smooths beads and forms mild steel sheet metal up to 16 Gauge
- Smooths beads and forms aluminum and copper up to 1/8 in. thick
- Machine supplied with a pair of upper and anvil dies
- 3-Position airflow regulates speeds of pneumatic hammer
- Machine controlled with 110V AC foot control
- 2-Die Set Brackets
- Quick change of upper dies
- Retractable handle makes machine easy to move around the shop
- Wider base support to prevent movement of machine while in use
| Frame Tube Sizes (In.) | 4 x 4 |
| Throat (In.) | 24 |
| Head Opening (In.) | 2-1/2 |
| Maximum Pressure (PSI) | 90 |
| Air Consumption (CFM) | 8.8 |
| 3-Speed Regulator (Hits Per Min.) | 4,400 - 4,800 / 3,200 - 3,500 / 1,800 - 2,000 |
